Samsung U365 (Gusto 2)
- Power on the handset
- Go to Menu, Settings, *
- Enter 000000 for SPC Code
- Select Network Settings
- Choose Phone Number and enter (MDN), press OK
- Choose NMSID to enter MIN (00 followed by the MIN) Press OK
- Press Exit when done
- Phone will restart and Programming is complete.
- No diagnostic mode required.
- Make sure phone is in diag mode. (if applicable)
- Ensure port on phone is clean, brush out if necessary.
- Check for proper cable and snug connection to phone port.
- Unplug computer side of USB cable, wait 3 seconds and plug into different usb port.
- Reinstall drivers for your mobile device. Use Device Manager to ensure you dont have any driver conflicts and the phone is showing up properly.