Phone Library
Motorola XT862 (Droid 3)
Programming Instructions
- Dial ##7764726 SEND
- Enter 000000
- Choose User Activation
- Enter MDN then click OK
- Enter MIN then click OK
- Hit the back button once and it will say “phone will reset now”
- Let it reset and phone will be programmed.
Diagnostic Mode
- Turn the phone on
- Go to Menu, Settings, Applications, Development
- Place a checkmark on USB Debugging.
- Drop down the phone’s notification bar
- Click on “USB connection“
- Choose PC Mode
Additional Troubleshooting
- Make sure phone is in diag mode. (if applicable)
- Ensure port on phone is clean, brush out if necessary.
- Check for proper cable and snug connection to phone port.
- Unplug computer side of USB cable, wait 3 seconds and plug into different usb port.
- Reinstall drivers for your mobile device. Use Device Manager to ensure you dont have any driver conflicts and the phone is showing up properly.