Phone Library
Motorola W755
Programming Instructions
- Power the phone on
- Enter 74663# then click CLR CLR (as fast as you can)
- Select NAM 1 click OK
- Enter in MDN then click OK
- Enter in MIN then click OK
- Click back twice
- The phone will power cycle and programming is now complete
Diagnostic Mode
- No diagnostic mode required.
Additional Troubleshooting
- Make sure phone is in diag mode. (if applicable)
- Ensure port on phone is clean, brush out if necessary.
- Check for proper cable and snug connection to phone port.
- Unplug computer side of USB cable, wait 3 seconds and plug into different usb port.
- Reinstall drivers for your mobile device. Use Device Manager to ensure you dont have any driver conflicts and the phone is showing up properly.